Filters
Product category
Current measurement
Voltage measurement
Safety
Features
Safety rating
Focus system
Resolution
Max temperature
Applications

Solar and PV test tools

A solar array has to be proven safe and productive on a DC circuit that stays live whenever the sun is up. Fluke gives installers and maintenance teams the tools to commission, test and troubleshoot PV systems with evidence behind every result.

A solar array only earns its return if it is installed safely and actually produces what it promised. That is harder to prove than it sounds. A photovoltaic system runs on high-voltage DC that is live whenever the sun is up, spread across rooftops and fields where conditions change by the hour. For the installer commissioning a new array and the team keeping an existing one healthy, the challenge is the same: to show, with evidence, that every string is safe, correctly connected and performing to expectation.

Why testing a PV system is unlike a normal installation

Solar brings problems that ordinary electrical work does not. You cannot switch off the source, so panels stay energised in daylight and every test happens on a live DC circuit. Performance is a moving target too, because output depends on irradiance and temperature, so a reading only means something when you capture the conditions alongside it. Commissioning a PV system calls for a specific set of checks, continuity and polarity, insulation resistance, open-circuit voltage and short-circuit or operating current, and an IV curve that reveals how a string really behaves. Doing all of that safely, on a roof, with the right solar test equipment, is what separates a proper handover from a hopeful one.

How Fluke helps you test and commission solar

Fluke builds solar test tools for each stage of a PV system's life, from commissioning a new install to finding the fault that is dragging down a plant's yield. Rather than a single meter, the range lets you match the tool to the task on the DC and performance side of the array.

PV installation and commissioning testers

A dedicated PV tester runs the required commissioning sequence, from insulation and continuity to voltage and current, so you can certify a new array against the relevant standards in one guided process.

IV curve tracers

An IV curve tracer measures how a string performs across its operating range, turning a suspicion of underperformance into a clear picture of shading, mismatch or degradation.

Irradiance and performance measurement

A solar irradiance meter captures the light and temperature behind every reading, so a performance check is comparable and defensible rather than a snapshot without context.

Solar multimeters and DC clamp meters

For everyday checks, a solar multimeter and a DC clamp meter read the voltages and currents found in PV systems, giving you fast answers during install and fault-finding.

Explore

Ground-fault location

When a string is losing current to earth, a ground-fault locator helps you find the problem quickly instead of isolating it panel by panel.

What proper solar testing delivers

Testing a PV system properly protects the investment behind it. You hand over an installation you can certify, with documented proof that it is safe and performing, which supports warranty, compliance and the customer's confidence. You also protect yield: systematic testing and monitoring catch a failing string, a poor connection or a ground fault before they quietly erode production for months. For an operations team, that means fewer truck rolls, faster diagnosis and decisions based on measured evidence rather than guesswork. The value of the right solar tools is the difference between hoping an array performs and knowing it does.

The technology behind dependable PV testing

Reliable results on solar come from measuring the whole picture, safely, on a live DC system. Instruments rated for the high DC voltages of a modern array keep the work safe, while capturing irradiance and temperature alongside electrical readings makes performance data meaningful. An IV curve reveals behaviour a single voltage reading cannot, and guided commissioning routines keep every required test in the right order with a clean record at the end. Increasingly, logging and monitoring turn one-off checks into a performance history you can trust. The technology serves one goal: a PV system proven safe and productive, with the evidence to back it.

Choosing the right solar test equipment

The best toolkit depends on whether you are commissioning new installations, running performance audits or maintaining an operating plant. Because solar work spans safety, commissioning and performance, it pays to plan the tools together rather than piece them out. Talk to a Fluke specialist to match the solar test equipment to your work, request a demonstration, or find an authorised Fluke dealer to move from a shortlist to the kit that lets you install and maintain PV with confidence.

Explore how Fluke solar PV testing solutions enhances your work.

See the difference Fluke brings to solar PV testing.

In a market filled with various testers, Fluke simplifies your workflow by tailoring solutions to your specific needs.

Utility Scale and Industrial - PV Modules
Fluke PVA-1500 Series / Fluke 393 FC

Fluke PVA-1500 Series / Fluke 393 FC

What it tests

  • Module/string performance
  • Power / efficiency
  • IV Curve tracing / 1500VDC
  • Operational current / voltage
  • Continuity / Polarity
Fluke Ti480 Pro / TiX 580

Fluke Ti480 Pro / TiX 580

What it tests

  • Defective cells
  • Overheated conductors
  • High-resistance connections
  • PV junction boxes
Fluke IRR2-BT

Fluke IRR2-BT

What it tests

  • Irradiance and Temperature
  • Tilt and Orientation
Fluke 1630-2 FC / Fluke 1625-2 / Fluke 1537 / Fluke 1555 FC

Fluke 1630-2 FC / Fluke 1625-2 / Fluke 1537 / Fluke 1555 FC

What it tests

  • Earth Resistance
  • Cabling Insulation resistance
  • Leakage current
  • Equipotential bonding conductors
  • Lightning potential conductors
Utility Scale and Industrial - Combiner Boxes
Fluke PVA-1500 Series / Fluke 393 FC

Fluke PVA-1500 Series / Fluke 393 FC

What it tests

  • Module/string performance
  • Power / efficiency
  • IV Curve tracing / 1500VDC
  • Operational current / voltage
  • Continuity / Polarity
Fluke Ti480 PRO/ TiX580

Fluke Ti480 PRO / TiX580

What it tests

  • Overheated conductors
  • Malfunctioning fuses
  • High-resistance connections
Fluke 393 FC

Fluke 393 FC

What it tests

  • Current
  • Voltage
  • Power
  • Continuity / Polarity
Utility Scale and Industrial - Inverters
Fluke Ti480 PRO/ TiX580

Fluke Ti480 PRO/ TiX580

What it tests

  • Inverter performance issues
  • Problems with cabling connections
  • Unbalance
Fluke 1777 / Fluke Norma 6000

Fluke 1777 / Fluke Norma 6000

What it tests

  • Power Quality analysis
  • Harmonics analysis
  • Trasients and Events
  • Inverter Efficiency
Fluke ii910

Fluke ii910

What it tests

  • Partial discharge
Utility Scale and Industrial - Distribution board
Fluke Ti480 PRO/ TiX580

Fluke Ti480 PRO/ TiX580

What it tests

  • Overheated conductors
  • High-resistance connections
  • Malfunctioning switches / breakers
Fluke ii910

Fluke ii910

What it tests

  • Partial discharge
Utility Scale and Industrial - Substation
Fluke Ti480 PRO/ TiX580

Fluke Ti480 PRO/ TiX580

What it tests

  • High resistance connections
  • Transformer oil levels
  • Overloaded circuits
  • Multi-phase imbalance
  • Overheated components
Fluke 1777 / Fluke Norma 6000

Fluke 1777 / Fluke Norma 6000

What it tests

  • Power Quality analysis
  • Harmonics analysis
  • Transients and Events
  • Unbalance
Fluke ii910

Fluke ii910

What it tests

  • Partial discharge in line insulators, transformers and other HV components
  • Partial discharge in Switchgear
Residential solar systems/installation - Solar Panels
Fluke 393FC

Fluke 393FC

What it tests

  • Current
  • Voltage
  • Power
  • Continuity/ Polarity
  • 1500VDC
Fluke SMFT-1000 Solar Tool Kit

Fluke SMFT-1000 Solar Tool Kit

What it tests

  • Irradiance / Temperature/ Inclination/ Orientation
  • IV Curve/ Power/ Performance
  • Polarity/Insulation/ Continuity
  • 1000VDC
Fluke TiS55+/ Fluke TiS75+

Fluke TiS55+/ Fluke TiS75+

What it tests

  • Solar Panel Defective Cells
  • Solar Panel efficiency
  • Cabling problems
Residential solar systems/installation - Electrical Box
Fluke 1738

Fluke 1738

What it tests

  • Power Quality analysis
  • Harmonics analysis
  • Transients and Events
Fluke 1630-2 FC/ Fluke 1625-2/ Fluke 1587 FC

Fluke 1630-2 FC/ Fluke 1625-2/ Fluke 1587 FC

What it tests

  • Earth Resistance
  • Cabling Insulation resistance
  • Leakage current
Residential solar systems/installation - Residential charging station
Fluke FEV300, FEV350

Fluke FEV300, FEV350

What it tests

  • Safety and functionality test of AC EVSE
  • EV simulation check
  • Pass/fail test results

Why Choose Fluke Solar Tools

Fluke meets the growing demand for innovative solar Photovoltaic testing technology by offering a specialized range of tools designed specifically for electricians, PV installers, and maintenance technicians. With precision solar meters and essential PV testers, Fluke is committed to addressing the unique challenges associated with surveying, installation, maintenance, and reporting for solar installations.

Our Solar PV testing solutions are engineered for accuracy, ensuring reliable results in every task. Enhance energy efficiency, from surveying to routine maintenance. Count on Fluke to deliver consistent performance, supporting the integrity of your solar projects.

Explore how Fluke solar PV testing solutions enhances your work

See the difference Fluke brings to solar PV testing. In a market filled with various testers, Fluke simplifies your workflow by tailoring solutions to your specific needs.

Frequently asked questions for solar tools

What is a solar meter?

A solar meter, also known as a solar irradiance meter or pyranometer, is a device that measures the amount of solar energy or irradiance that is being emitted by the sun. It is commonly used in solar power applications to optimize system performance and ensure that it is operating at peak efficiency. Solar meters can measure solar radiation in units of W/m2, and can accumulate PV yield production and local energy consumption to monitor and analyze PV plant performance. They are also used to measure the efficiency of windows and other solar power devices.

What type of meter do I need for solar power?

For The type of meter you need for solar power will depend on your specific needs. For grid-tied solar systems, a bi-directional utility meter is required to keep track of the electricity that is being transferred to the grid. A PV meter, on the other hand, is used to measure how much electricity your solar system generated. Additionally, a solar irradiance meter or pyranometer can be used to measure the amount of solar radiation that is being received by your solar panels. By using a combination of these meters, you can optimize the performance of your solar power system and ensure that it is operating at peak efficiency. solar power applications, a pyranometer or a solar irradiance meter is typically used to measure the amount of solar radiation that is being received.

What is the difference between a pyranometer and a solar irradiance meter?

A pyranometer measures the total amount of solar radiation across all wavelengths, while a solar irradiance meter measures only the radiation in the visible and near-infrared range.

What are the benefits of using a solar meter?

Using a solar meter can help you optimize the performance of your solar power system, ensure that it is operating at peak efficiency, and detect any issues that may be affecting its performance.

How do I use a solar meter?

To use a solar meter, simply point it at the sun and take a reading of the irradiance level. You can then use this data to calculate the power output of your solar panels.

What is the accuracy of a solar meter?

The accuracy of a solar meter will depend on the specific model and manufacturer. However, most high-quality solar meters have an accuracy of around +/- 5%.

Can I use a regular light meter for solar power applications?

No, a regular light meter is not suitable for solar power applications as it is not designed to measure the high levels of irradiance that are typically found in solar power systems.

What tools do I need for solar power testing?

In addition to a solar meter, you may also need a clamp meter to measure current and voltage, a multimeter to measure resistance and continuity, and a thermal imager to detect hot spots and other anomalies.

What are the best solar energy industry tools?

Some of the best solar energy industry tools include solar irradiance meters, pyranometers, clamp meters, multimeters, and thermal imagers.

Chat with ourFluke assistant
Clear Chat