Fluke i200 AC Current Clamp
Fluke i200 AC Current Clamp is rated out of 5 by 2.
Key Features
- Companion to a DMM for measuring up to 200 A AC
- 1 mA per Amp output guarantees easy reading on you meter
- Take accurate current readings without breaking the circuit
- Max. conductor Ø 20 mm
- CAT III 600 V safety rating
Product overview: Fluke i200 AC Current Clamp
The i200 is a single range 200 A clamp-on AC Current Clamp with current output via safety shrouded banana plugs. The i200s is a dual range 20 A and 200 A clamp-on AC Current Clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana input. The i200 is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
Specifications: Fluke i200 AC Current Clamp
| Specifications | |
| Nominal current range | 200 A |
| Continuous current range | 0.5 A - 200 A |
| Maximum non-destructive | 240 A |
| Lowest measurable current | 0.5 A |
| Basic accuracy | 1% + 0.5 A (48-65 Hz) (% reading + floorspec) |
| Useable frequency | 40 Hz - 10 kHz |
| Output level(s) | 1 mA/A |
| Safety Specifications | |
| Safety | CAT III, 600 V |
| Maximum voltage | 600 V AC |
| Mechanical and General Specifications | |
| Warranty | 1 year |
| Maximum conductor diameter | 20 mm |
| Maximum conductor size (busbar) | 20 x 5 mm |
| Output cable length | 1.5 m |
| Shrouded banana plugs | Yes |
Models: Fluke i200 AC Current Clamp
Fluke i200
Rated 5 out of 5 by bambang from accurate tested Several Times use fluke 1630-2 FC and fluke 1625-2
Date published: 2020-02-22
Rated 4 out of 5 by purrungas from compact size nice size to carry around, too bad it does not work with my Fluke 117 as they had told me, had to send it back and now waiting for the i200s" supposedly this one should work
Date published: 2013-10-23