PG7000 Ver 1.05f Embedded Software (.bin)
TITLE | VER | USE WITH |
PG7000™ | 1.05f | PG7102, PG7302 or PG7601 |
Instructions: |
TITLE | VER | USE WITH |
PG7000™ | 1.05f | PG7102, PG7302 or PG7601 |
Instructions: Download the file. Run Winflash and select the file downloaded as the file to write to the product. Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox. The updating of embedded software should only be performed after given specific instructions to do so from a Fluke Calibration Authorized Service Center. If the update isn't performed properly, your product will be inoperable until it is. |
Updates Include: | |
1.05f | |
ADD | Support for auto-float targets < 3 psia VAC. |
FIX | Allow recovery from autofloat overshoots that could stop the autofloat execution. |
1.05d | |
CHG | Corrected calculation of piston fall rate. |
1.05c | |
ADD | Increase # of PCs from 3 to 18. |
ADD | Cal & temp coefficient fields & remote command. |
ADD | Application of the temp coefficient. |
ADD | Corrected calculation of piston fall rate. |
CHG | Change max # of masses in a mass group from 10 to 99. |
CHG | Gauge PG label from 7202 to 7102. |
1.05b | |
ADD | New motor control power speed tables for new style board. Eliminate the DIP switch setting for motor type. Use this switch to ID new style boards. |
ADD | A check for the serial # and query the user if it has been set yet. |
ADD | Factory reset entry screen & menu function for discrete facory resets (DIAG only). |
ADD | TEST selection to the DIAG menu to execute the COMx & IEEE production tests. |
CHG | The opening credits to show correct model (PG7601, PG7102 or PG7302). |
CHG | The platter rotation ready criteria from 45 to 30 rpm for the PGG & PGO. |
FIX | AIR medium z calculation error. Reset the AutoFloat factory settings when the PG is initialized. |