Fluke 1AC II Non-Contact Voltage Tester
Fluke 1AC II Non-Contact Voltage Tester is rated out of 5 by 44.
Key Features
- Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
- Continuous self-test so you always know it’s working
- Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
- Audible/Silent mode for added convenience
Product overview: Fluke 1AC II Non-Contact Voltage Tester
The pocket-sized voltage detector
The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.
The tip glows red and a beeper sounds when voltage is detected
- A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
- Optionally, the beeper can be disabled for use in quiet environments
Continuous self-test so you always know it’s working
- When the tip blinks red you know it’s working properly
- Provides a continual visual indication that the 1AC II is on
90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use
- Wide voltage detection range allows for use in a broad range of applications
- Also available in a low voltage model from 20 V to 90 V AC for controls circuits
Safety features
- Rated to CAT IV 1000 V for added protection
- CE and CSA approved
Additional tool features
- Audible/Silent mode for added convenience in quiet environments
- On/Off button
- Batteries included
- 2 year warranty
Specifications: Fluke 1AC II Non-Contact Voltage Tester
| Specifications | |
| Operating Principles | Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
| Voltage sensing ranges | Nominally, 90 V AC to 1000 V AC |
| Detector tip style | Flat-tip |
| Light source | One high intensity red LED |
| Agency Approvals | |
| Safety | IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V |
| EMC | IEC 61326-1: Portable |
| IP Rating | IP 40 |
| Operating Temperature | -10°C to 50°C (-14°F to 122°F) |
| Operating Humidity Ranges | 0% to 95% (0°C to 30°C) |
| 0% to 75% (30°C to 40°C) | |
| 0% to 45% (40 to 55°C) | |
| Operating Altitude | 3000 m |
| Cleaning | Clean with damp cloth |
| Batteries | 2 AAA alkaline batteries included |
| Battery Life | Typical battery life of greater than 1 year |
| Warranty Period | Two years |
| Product does not respond to random electrostatic discharge. | |
Models: Fluke 1AC II Non-Contact Voltage Tester
Does it come with a TC
Fluke 1AC II Non-Contact Voltage Tester does not come with a thermocouple.
Date published: 2024-09-30
Rated 5 out of 5 by Evander from Easy to use! I bought a Mont ago and I'm so happy, c'oz it's so easy to use!
Date published: 2024-08-31
Rated 3 out of 5 by jpcallan from Battery leakage is death Fluke - please coat the circuit board with varnish, bedding compound, etc. to protect it fro battery leakage. I've had several die because a AA cell leaked only a little.
Date published: 2024-06-20
Rated 2 out of 5 by Biskuitz from Dangerous!!! I bought this a couple of years ago, and recently it stopped working in the middle of some work. I did the usual test on a known circuit (it beeped), checked the unknown circuit (no beep) and then started removing the wires and got electrocuted!!! Checked the batteries (they were very good), put in new batteries ... nothing ... glad I wasn't working on anything higher than 120V. Prior to this, it was a great little tester.
Date published: 2024-04-21
Rated 5 out of 5 by ajbain35 from Know what you can not see before you touch This is my third of fourth Fluke non contact tester. I spent many years in factories and industrial settings of all kinds dealing with machinery. The tester is well designed and you know when you are around electricity with visual and audible alarms. Having been zapped a fair number of times, I always reach for my Fluke even when I know the circuit is "not active."
Date published: 2023-12-04
Rated 5 out of 5 by Ken03 from Value for the money I love it, works perfect and it is very helpful when troubleshooting love circuits.
Date published: 2023-11-18
Rated 5 out of 5 by Blaine H from One of the best This is the non contact voltage tester that I've had in my toolbag for 20 plus years and will continue to utilize as part of my HVAC service kit.
Date published: 2023-06-22
Rated 5 out of 5 by Boss from Great long lasting product. Purchased my first Fluke tester 30 years ago. I guess I got my moneys worth. Just replaced it. Great, reliable tester.
Date published: 2023-01-01
Rated 5 out of 5 by Anonymous from Pros know Fluke & Fluke knows what you need. There are jobs where only Fluke is allowed to be used, why you may ask? Because thier the best.
Date published: 2022-10-15