Fluke ST120+ GFCI Socket Tester with Beeper
Key features
- Simple operation – Plug into socket; with the bright, easy-to-see LEDs, verify correct wiring or identify common wiring problems in both standard and GFCI outlets
- Save time – Eliminate multiple trips back and forth by using the beeper to help identify if breaker is switched on or off.
- GFCI outlets–with an integrated GFCI test, you can feel secure knowing that your GFCI equipped outlets are functioning properly.
Save 10% with code
FLUKE-10-POPULAR
Coupon price $20.70
Product overview: Fluke ST120+ GFCI Socket Tester with Beeper
Fluke ST120+ GFCI Socket Tester with Beeper
The Fluke ST120+ GFCI Socket Tester with Beeper checks that each wire in the outlet is properly connected to the building's electrical system. Via the bright LEDs and included chart, you can quickly and easily verify the wiring of an outlet. Able to identify several common wiring errors, including reversed phase and neutral wires and an open ground, the ST120+ will give you confidence on your next job.
Audible alert helps you work faster, safer
The ST120+ also gives you a unique audible alert anytime voltage is detected. Save time when trying to identify which circuit breaker is connect to which outlet. Just plug the socket tester in, walk to the circuit breaker panel, and listen for the beeper to turn off – or on – as you flip the breakers. Once it does, you’ve found the correct breaker. Time – and trips – saved.
When switched on, the integrated beeper can also alert you to hazardous voltage at the outlet, even if the wiring is incorrect. Working in an office, hospital or other location where you don’t want to interrupt others? No problem – the beeper can be switched off.
One-button GFCI tests
The included GFCI test button on the ST120+ Socket Tester allows you to also test the operation of GFCI outlets. With a single push, the ST120+ can verify the operation of your GFCI equipped outlet. If the GFCI trips as expected, perfect, you can move on. If not, it’s time to take a closer look.
Fast visual identification of all 6 wiring conditions
The ST120+ has three bright, easy-to-see LED indicators. This lets you see, at a glance, one of six wiring scenarios:
- Correct installation
- Open ground
- Open neutral
- Open hot
- Hot/neutral reversed
- Hot/ground reversed
Specifications: Fluke ST120+ GFCI Socket Tester with Beeper
| Specifications: | |
| Rated operating Voltage: | 110 - 125 V AC |
| Wattage: | 0.3 W |
| Frequency | 50/60 Hz |
| Integrated, switchable beeper | Yes |
| GFCI test | Yes |
| Indicator lights | 1 red, 2 green LEDs |
| Rating | CAT III 300 V |
| Warranty | Two years |
Models: Fluke ST120+ GFCI Socket Tester with Beeper
UPC#: 1 95112 01111 9