RPM4-E-DWT A70M/A7M-AF Embedded Software (.bin)
| TITLE | VER | USE WITH | NOT FOR USE WITH |
| RPM4-E-DWT A70M/A7M-AF™ | 1.00c 2012.05.01 | RPM4-E-DWT-AF | Do NOT use with NON "-Af" RPM4-E-DWT Models! |
| Instructions: | |||
| Download the file. Run Winflash and select the file downloaded as the file to write to the product. Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox. If your product has an model number ending in "-AF", it requires specific "-AF" embedded software. The updating of embedded software should only be performed after given specific instructions to do so from a Fluke Calibration Authorized Service Center. If the update isn't performed properly, your product will be inoperable until it is. | |||
| Updates Include: | |||
| Ver 1.00c (2012 May 01) ADD: (EDWT-15) Ability to Auto zero during pre-test exercise. CHG: (EDWT-3) RPM4-EDWT-AF is now compatible with alternate front panel display hardware. Ver 1.00b (2008 Jul 21) Initial release. | |||