Fluke i30s AC/DC Current Clamp
Model#:Fluke i30sPart#:2584935UPC#:0 95969 34510 1
Fluke i30s AC/DC Current Clamp is rated out of 5 by 2.
Key features
- Current clamp based on Hall Effect technology that measures both DC and AC current
- Includes a BNC connector for compatibility with oscilloscopes
- Current range: 30 mA to 30 A DC, 30 mA to 20 A AC rms
- Frequency range: DC to 100 kHz (-0.5 dB)
- CAT III 300 V safety rating
Sale ends soon.
Shop now!
DAYS
HR
MIN
SEC
In stock
$768.99
Product overview: Fluke i30s AC/DC Current Clamp
The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.
Specifications: Fluke i30s AC/DC Current Clamp
| Electrical specifications | |
| Specified current range | 30 mA to 30 A DC, 30 mA to 20 A AC rms |
| Usable current range | 5 mA to 30 A DC, 30 mA to 20 A AC rms |
| Crest factor | 1.4 in |
| Output sensitivity | 100 mV/A |
| Accuracy (at +25°C) | DC ±1 % of reading ±2 mA AC ± 0.5 dB of reading ±2 mA |
| Resolution | ±1 mA |
| Load impedance | > 100 kΩ |
| Conductor position sensitivity | ±1% relative to center reading |
| Frequency range | DC to 100 kHz (-0.5 dB) |
| Phase shift below 1 kHz | < 2° |
| Temperature coefficient | ±0.01% of reading / °C |
| Power supply | 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator |
| Working voltage (see Safety Standards section) | 300 V AC rms or DC |
| General Specifications | |
| Maximum conductor size | 19 mm diameter |
| Output connection | Safety BNC connector, supplied with safety 4 mm adapter |
| Output zero | Manual adjust via thumbwheel |
| Cable length | 2 m |
| Operating temperature range | 0°C to +50°C |
| Storage temperature range (with battery removed) | -20°C to +85°C |
| Operating humidity | 15% to 85% (non-condensing) |
| Weight | 250 g |
| Safety | IEC 61010-1, Pollution Degree 2 |
| IEC 61010-2- 032: CAT III 300V | |
| Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc andfrequencies below 1 kHz. | |
| EMC Compatibility | IEC 61326-1: Portable Electromagnetic Environment |
Models: Fluke i30s AC/DC Current Clamp
Fluke i30s
AC/DC Current Clamp
UPC#: 0 95969 34510 1
Rated 5 out of 5 by KAS155 from Fantastic Meter and Accessories I bought this meter 3 months ago after I lost my previous Fluke Meter that I had since Fluke made digital meters. I have used many Fluke products over the years and have always had good testing results. After checking the specs of this meter I decided this was exactly what I needed. I also decided that the accessories that came with this package made it more versatile and I find that the long length leads make a job easier. The hanging accessories such as the magnetic holder comes in handy when there is metal around that I can vertically mount the meter in front of me instead of trying to balance it somewhere. I not only recommend this meter but also the accessories that come with it.
Date published: 2016-12-08
Rated 5 out of 5 by WDinstallerGS from This product is very diverse, handling all our AC and DC requirements We use the Fluke 87V in every aspect of our work, from the initial "build-up" of our Gauge systems, through the deployment of the system and at the final termination of the system into the Customers operation. The Fluke 87V is a superior check on the performance of our equipment and a very accurate method to use for troubleshooting. If I were ever limited to only one piece of measurement equipment on a project, I would pick the Fluke 87V every time. I have never had a unit fail or report inaccurate measurements. After many years of use, in my experience, there is no meter manufacturer other than Fluke to even consider !
Date published: 2012-08-13