Fluke CNX™ i3000 iFlex® AC Current Measurement Kit

Key features

The Fluke CNX i3000 iFlex® AC Current Measurement Kit provides measurement of all common electrical parameters.

The CNX 3000 Wireless Multimeter Offers:

True RMS AC and DC voltage measurements to 1000V
True RMS AC and DC current with 0.01 mA resolution
Continuity, resistance, diode test, capacitance and frequency measurements
MIN/MAX recording
CAT III 1000 V; CAT IV 600 V; IP54

The CNX i3000 iFlex® AC Wireless Current Module Offers:

True RMS AC current measurements to 2500 A
3% accuracy
Memory recording up to 65,000 readings
iFlex® Current Probe allows you to get into tight, awkward spaces
Backlit LCD Display
CAT III 1000, CAT IV 600 V; IP42

Using the optional PC adapter, the CNX wireless troubleshooting system can track up to 10 measurement modules simultaneously, with results sent to a PC for further analysis.

Download the product manual

Buy now

Product overview: Fluke CNX™ i3000 iFlex® AC Current Measurement Kit

The Fluke CNX i3000 iFlex® AC Current Measurement Kit is part of the Fluke team of wireless troubleshooting tools.

Connect the CNX i3000 iFlex® AC Wireless Current Module to your test point, and view the results up to 20 meters away on the CNX Wireless Multimeter. You’ll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems. Or use as a stand-alone measurement tool or combine with other CNX modules as a system for multiple measurements. From short distances, you can even view readings from modules through closed electrical panels. Plus no more writing down data as the CNX i3000 current module captures up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery, with only the measurement module in harm’s way.

Specifications: Fluke CNX™ i3000 iFlex® AC Current Measurement Kit

CNX 3000 Wireless Multimeter

For all specifications: accuracy is specified for one year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %. Accuracy specifications take the form of ± ([ % of Reading ] + [ Number of least significant digits ]).

Detailed Specifications
AC Voltage
Range ¹		Resolution	Accuracy ² ³
			45 Hz to 500 Hz	500 Hz to 1 kHz
600.0 mV		0.1 mV	1.0 % + 3	2.0 % + 3
6.000 V		0.001 V
60.00 V		0.01 V
600.0 V		0.1 V
1000 V		1 V
Notes: ¹ All AC voltage ranges are specified from 1 % of range to 100 % of range. ² Crest factor of ≤ 3 at full scale p to 500 V, decreasing linearly to crest factor < 1.5 at 1000 V. ³ For non-sinusoidal waveforms, add –(2 % of reading + 2 % full scale) typical, for crest factor up to 3.
DC Voltage, Continuity, Resistance, Diode Test and Capacitance
Function		Range	Resolution	Accuracy
mV		600.0 mV	0.1 mV	0.09 % + 2
V		6.000 V	0.001 V	0.09 % + 2
		60.00 V	0.01 V
		600.0 V	0.1 V
		1000 V	1 V	0.15 % + 2
Ω		600 Ω	1 Ω	Meter beeps at < 25 Ω, beeper detects opens or shorts of 250 μs or longer.
Ω		600.0 Ω	0.1 Ω	0.5 % + 2
		6.000 kΩ	0.001 kΩ	0.5 % + 1
		60.00 kΩ	0.01 kΩ
		60.00 kΩ	0.1 kΩ
		600.0 kΩ	0.001 MΩ
		50.00 MΩ	0.01 MΩ	1.5 % + 3
Diode test		2.000 V	0.001 V	1 % + 2
μF		1000 nF	1 nF	1.2 % + 2
		10.00 μF	0.01 μF
		100.0 μF	0.1 μF
		9999 μF¹	1 μF	10 % typical
Notes: ¹ In the 9999 μF range for measurements to 1000 μF, the measurement accuracy is 1.2 % + 2.
AC and DC Current
Function		Range ¹	Resolution	Accuracy
mA AC (45 Hz to 1 kHz)		60.00 mA	0.01 mA	1.5 % + 3
		400.0 mA ³	0.1 mA
mA DC ²		60.00 mA	0.01 mA	0.5 % + 3
		400.0 mA	0.1 mA
Notes: ¹ All AC current ranges are specified from 5 % of range to 100 % of range. ² Input burden voltage (typical): 400 mA input 2 mV/mA. ³ 400.0 mA accuracy specified up to 600 mA overload.
Frequency
Range		Resolution	Accuracy ¹
99.99 Hz		0.01 Hz	0.1 % + 1
999.9 Hz		0.1 Hz
9.999 kHz		0.001 kHz
99.99 kHz		0.01 kHz
Notes: ¹ Frequency is specified up to 99.99 kHz in volts and up to 10 kHz in amps.
Input Characteristics
Function	Overload Protection	Input Impedance (nominal)	Common Mode Rejection Ratio (1 kΩ unbalance)	Normal Mode Rejection
	1100 V RMS	> 10 MΩ < 100 pF	> 120 dB at DC, 50 Hz or 60 Hz	> 60 dB at 50 Hz or 60 Hz
	1100 V RMS	> 10 MΩ < 100 pF	> 60 dB, DC to 60 Hz
	1100 V RMS	> 10 MΩ < 100 pF	> 120 dB at DC, 50 Hz or 60 Hz	> 60 dB at 50 Hz or 60 Hz
Open Circuit Test Voltage			Full Scale	Typical Short Circuit Current
	1100 V RMS	< 2.7 V DC	To 6 MΩ: < 0.7 V DC 50 MΩ: < 0.9 V DC	< 350 mA
	1100 V RMS	< 2.7 V DC	To 6 MΩ: 2.000 V DC	< 1.1 mA
Function		Overload Protection	Overload
mA		Fused, 44/100 A, 1000 V FAST Fuse	600 mA overload for 2 minutes maximum, 10 minutes rest minimum
MIN/MAX Recording
Function		Accuracy
DC functions		The specified accuracy of the measurement function ± 12 counts for changes > 350 mS in duration.
AC functions		The specified accuracy of the measurement function ± 40 counts for changes > 900 mS in duration.
General Specifications
Maximum voltage between any terminal and earth ground		1000 V DC or AC RMS
Ω fuse protection from A inputs		0.44 A (44/100 A, 440 mA), 1000 V FAST Fuse, Fluke specified part only
Display (LCD)		Update rate: 4/sec Volts, amps, ohms: 6000 counts Frequency: 10,000 counts Capacitance: 1,000 counts
Battery type		Three AA Alkaline batteries, NEDA 15A IEC LR6
Battery life		300 hours minimum
Temperature		Operating: -10 °C to 50 °C Storage: -40 °C to 60 °C
Relative humidity		0 % to 90 % (0 °C to 35 °C) 0 % to 75 % (35 °C to 40 °C) 0 % to 45 % (40 °C to 50 °C)
Altitude		Operating: 2,000 m Storage: 12,000 m
Temperature coefficient		0.1 X (specified accuracy) / °C (<18 °C or >28 °C)
Wireless frequency		2.4 GHz ISM Band 20 meter range
Size (HxWxL)		4.75 cm x 9.3 cm x 20.7 cm (1.87 in x 3.68 in x 8.14 in)
Weight		340 g (12 oz)
Safety standards		US ANSI: ANSI/ISA 61010-1 / (82.02.01): 3rd edition CSA: CAN/CSA-C22.2 No 61010-1-12: 3rd edition CE European: IEC/EN 61010-1:2010
Electromagnetic compatibility EMI, RFI, EMC, RF		EN 61326-1:2006, EN 61326-2-2:2006 ETSI EN 300 328 V1.7.1:2006, ETSI EN 300 489 V1.8.1:2008, FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249 FCCID : T68-FWCS IC:6627A-FWCS
Ingress Protection (IP) rating		IP54
Notes: • Accuracy is specified as ± ([% of reading] + [number of least significant digits]). • All ranges are autoranging. • Accuracy is specified from 5 % to 100 % of the range obtained by autoranging, from 18 °C to 28 °C.

Fluke CNX i3000 iFlex^® AC Wireless Current Module

Specifications
Range	2500 A AC
Resolution	0.1 A to 999.9, 1A from 1000 to 2500
Accuracy	3 % ± 5 digits
Crest factor (50 Hz/60 Hz)	3.0 at 1100 A, 2.5 at 1400 A, 1.42 at 2500 A, add 2 % for C.F. > 2
Display	3-1/2 digits, LCD w/backlight
Log rate/interval	1 sec minimum/adjustable by PC or front panel
Battery type	2 AA, NEDA 15 A, IEC LR6
Battery life	400 hours
Memory	Record up to 65,000 readings
RF communications	2.4 GHZ ISM Band
RF communication range	20 Meters
Operating temperature	-10 °C to +50 °C
Storage temperature	-40 °C to +60 °C
Operating humidity	90 % at 35 °C 75 % at 40 °C 45 % at 50 °C
EMC	EN 61326-1:2006
Safety compliance	EN/IEC 61010-1:2010 to 1000 V Measurement Category (CAT) III 600 V Measurement Category (CAT) IV EN/IEC 61010-2-030:2010 EN/IEC 610101-2-031:2002 EN/IEC 61010-2-032:2002
Pollution degree	2
Temperature coefficient	Add 0.1 X (specified accuracy) / °C per °C (<18 °C or >28 °C)
Safety rating	CAT IV 600 V, CAT III 1000 V
Certifications	CSA, FCC T68-FWCS IC:6627A-FWCS
Ingress Protection (IP) rating	IP42
Size (HxWxD)	16.5 cm x 6.35 cm x 3.56 cm (6.5 in x 2.5 in x 1.4 in)
Weight	.22 kg (8 oz)
Jaw opening	25.4 cm (10 in) coil

Please enable cookies to view product reviews.

Manuals + resources: Fluke CNX™ i3000 iFlex® AC Current Measurement Kit

Data sheets (1)

Fluke CNX™ i3000 iFlex® AC Current Measurement Kit | Data sheets

Application notes (1)

CNX Application Illustrations

Videos (4)

Register products

Register product

Talk to a Fluke sales expert