Fluke i200s AC Current Clamp
Fluke i200s AC Current Clamp is rated out of 5 by 2.
Key features
- Companion to your scopemeter, power quality meter or digital multimeter to measure up to 200 A AC
- 1mV per Amp output guarantees easy reading on your meter
- Included adapter for DMM's
- Two ranges: 20 A & 200A, 10 or 100 mV/ Amp output
- Take accurate current readings without breaking the circuit
- Max. conductor Ø 20 mm
- CAT III 600V safety rating
Product overview: Fluke i200s AC Current Clamp
Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.
Specifications: Fluke i200s AC Current Clamp
| Specifications | |
| Nominal current range | 20 A 200 A |
| Continuous current range | 0.1 A - 24 A 0.5 A - 200 A |
| Maximum non-destructive | 240 A |
| Lowest measurable current | 0.1 A |
| Basic accuracy | 1.5% + 0.5 A (48-65 Hz) (% reading + floorspec) |
| Useable frequency | 40 Hz - 10 kHz |
| Output level(s) | 100 mV/A 10mV/A |
| Safety Specifications | |
| Safety | CAT III, 600 V |
| Maximum voltage | 600 V AC |
| Mechanical and General Specifications | |
| Warranty | 1 year |
| Maximum conductor diameter | 20 mm |
| Maximum conductor size (busbar) | 20 x 5 mm |
| Output cable length | 2 m |
| BNC Adapter | Yes |
| BNC to banana adapter included | Yes |
Models: Fluke i200s AC Current Clamp
FLK-i200s
Fluke i200s AC Current Clamp
Does this device pose any risks if it is left clamped on an operating conductor while removed or unplugged from the meter such as the same with other CTs?
Please refer to the instruction sheet for the Fluke i200s AC Current Clamp to be sure to adhere to local and national safety codes while using.
Date published: 2023-12-08
Rated 5 out of 5 by MikeJ from Fluke i200s AC Current Clamp The i200s AC Current Clamp is exactly what I needed. Within days I was able to identify an issue with the product I was sampling.
Date published: 2022-01-04