CalNet®: The European Specialist in Calibration
Fluke has its own calibrations laboratories in the United Kingdom, The Netherlands and Germany, and authorized service partners in most of the other countries in Europe. All These calibration laboratories work together as a single calibration network: CalNet.
CalNet can issue the calibration certificates you need to meet ISO 9000 standards. CalNet guarantees traceability and access to the best calibration facilities the network can offer. Because of constant information exchange and comparing standards within the network, traceability increases while inaccuracy and uncertainty decreases.
CalNet is able to help you meet the calibration needs of not only equipment made by Fluke but also other manufacturers products. It is a network that provides you with some real key advantages:
- CalNet laboratories are approved by and traceable to the National Standards Institutes.
- Each Laboratory is a link in the chain of an active network. Sharing information, expertise and the same quality standards.
The need for calibration is directly related to the specific tasks performed by your equipment. CalNet is able to provide you with the services tailored to your need which include:
- Perform verification check for simple test equipment. The CalNet sticker placed on your instrument after testing guarantee that it operates as specified.
- CalNet Certificate including a calibration report. When you need to know the exact results of the calibration.
- National calibration certificate if you need direct traceability to the National Standards Institutes.
- CalNet offers complete inventory and maintenance management of your installed test and measuring equipment including equipment of other manufacturers. One address for all your equipment maintenance and service needs
Fluke can perform calibrations in different ways, so you can choose the calibration which has the best fit to your quality system, in relation to the price. The calibrations are divided in 4 levels, each with their specific procedure, from which the details are described hereafter. Download the Calibration Request Form.
CalNet
Traceable calibration with certificate. Adjustments are carried out if points are at 70% of specification or worse. If points are out of specification, a report with measurement data is supplied before adjustment.
CalNet+
Traceable calibration with certificate and a report with measurement data. Adjustments are carried out if points are at 70% of specification or worse. If points are out of specification, a report with measurement data is supplied before adjustment.
Calintl
Accredited calibration (RvA, etc.) with a certificate and report with measurement data. No adjustments are performed. For each point, the measurement uncertainty is provided.
Calintl+
Accredited calibration (RvA, etc.) with a certificate and report with measurement data before and after possible adjustment. For each point, the measurement uncertainty is provided.
For a large number of units, the logistic process of collecting, packing, sending, receiving and returning to the user is a time consuming operation. This can take up to 5 working days, during which the equipment is not available for the user. That's why Fluke offers you the possibility to calibrate your equipment at your own site.
Fluke (UK) offers an "On-Site" opportunity for Fluke and Robin industrial products.
Fluke and Robin Industrial Products
We have at our disposal teams of technician with a complete set of calibration standards. All the calibrations can then be concentrated in one or more periods. The equipment stays at your location and the turnaround time for the user is always within one day!
The calibrations are performed in the same manner as in the workshop and will also be fully administrative finished. This means, a sticker on the equipment, a certificate and a complete list off all performed calibration points with status information on type number level. This list can also be provided as a data file, so your management system can be updated automatically.
It is possible that for certain equipment calibration at your location it is not possible for technical reasons. For this equipment the calibration in our workshop will be fully coordinated by our technician. This is also for equipment that we can subcontract for you. The advantages for you are; less logistic work, as short as possible turnaround times and direct contact with our technician.
For the onsite calibration, only a room for the installation of our calibration standards and, a coordinator to deliver the equipment is required.
To ensure that you realize maximum productivity from your equipment and assist you in building the base for your own ISO quality management program, Fluke is committed to helping you achieve the highest possible quality standards. We can help you keep your test, measurement, and calibration equipment at consistently high levels of operation and accuracy. Fluke is dedicated to ISO standards in controlling our own processes and quality of support.
Fluke Calibration Laboratories Policies
Fluke’s policy on statements of conformity to specifications or a standard for the calibration as referred to in ISO 17025:2017 is below. If the described policy is not acceptable, or if more information is needed, please contact us.
Policy For Making Statements Of Conformity In Calibration Certificates
Fluke Corporate ISO 9001 Certificate of Registration
Fluke Corporate Quality Manual
The Fluke Corporate Quality Manual applies to all Fluke locations.
ISO/IEC 17025 Accreditation
Fluke accredited laboratories are transitioning from IEC/ISO 17025 revision 2005 to 2017.
ISO and ILAC have issued a joint letter indicating the transition period for laboratories to comply with ISO/IEC 17025 revision 2017: Joint ILAC-ISO Communication Regarding 17025 Revision Transition.
Note: All Fluke 17025 accredited laboratories will have their on-site re-accreditation assessments to ISO/IEC 17025:2017 by November 30, 2020.
When you receive an ISO/IEC 17025 accredited calibration from any Fluke facility around the world, you can be assured that the calibration results are accepted in every country. The organizations that accredit Fluke facilities such as UKAS, NVLAP, A2LA, SCC (CLAS), DAkkS and RvA are all recognized by the International Laboratory Accreditation Cooperation (ILAC) and are members of the ILAC Mutual Recognition Arrangement (MRA). This means that calibration certificates bearing the logo from these organizations are recognized by other signatories to the ILAC MRA, which includes most of the world. More information about the ILAC MRA can be found at the ILAC website. For information on European Accreditation, visit their website at European Accreditation (EA).
ISO 9001 Registration
Some Fluke facilities are registered to ISO 9001 and share a globalized Quality Management System ensuring the same level of process controls and quality across facilities. Fluke has an ongoing commitment to quality through the continuous improvement process required by the internationally recognized ISO 9001 Quality System registration.
North America
17025 Quality Manual
The Fluke 17025 Quality Manual applicable to Fluke accredited laboratories claiming compliance to ISO/IEC 17025:2005 can be found here: Fluke 17025 Quality Manual.
The Fluke 17025 Quality Manual applicable to Fluke accredited laboratories claiming compliance to ISO/IEC 17025:2017 can be found here: Fluke 17025 Quality Manual.
Fluke North America Reasonable Access Policy
A2LA 17025 Accreditation and ANAB 9001 Registration
Some calibrations offered by Fluke are performed under accreditation by the American Association for Laboratory Accreditation (A2LA). Fluke laboratories accredited by A2LA are identified below. Find more information regarding the A2LA organization and accreditation at A2LA.
Fluke, Everett – Everett Service Center
A2LA Certificate No. 2166.01 Certificate and Scope of Accreditation.
Certificate and Scope apply to A2LA calibration options for new and serviced electrical calibration products.
Everett Service Center is also registered to ISO 9001.
ISO 9001 ANAB Certificate No. 10100/2
Fluke, Beaverton – Everett Service Center
A2LA Certificate No. 2166.01 Certificate and Scope of Accreditation.
The Fluke Beaverton facility is a satellite location to the Everett Service Center; therefore they share the same Certificate and Scope of Accreditation. The Scope parameters applicable to Beaverton start towards the end of the document. Certificate and Scope apply to A2LA calibration options for new and serviced electrical calibration products.
Beaverton Laboratory is also registered to ISO 9001.
ISO 9001, ANAB Certificate No. 10100/17
Fluke Calibration, Phoenix – Primary Pressure and Flow Lab
A2LA Certificate No. 1599.01 Certificate and Scope of Accreditation
Certificate and Scope apply to all calibrations performed on all new and serviced Fluke Calibration (and former DHI) model gas flow and primary pressure calibration products (molbox, molbloc, PG7000, FPG8601) and service of pressure products from other manufacturers.
The Phoenix Pressure and Flow Laboratory is also registered to ISO 9001.
ISO 9001, ANAB Certificate No. 10100/18
NVLAP 17025 Accreditation and ANAB 9001 Registration
Some calibrations offered by Fluke are performed under accreditation by the National Voluntary Laboratory Accreditation Program (NVLAP). Fluke laboratories accredited by NVLAP are identified below. Find more information regarding the NVLAP organization and accreditation at NVLAP.
Fluke Calibration, American Fork – Primary Temperature Lab
NVLAP Lab Code 200348-0 Certificate and Scope of Accreditation
Certificate and Scope apply to all calibrations performed on new and serviced primary temperature calibration products, probes and readouts, and service of temperature products from other manufacturers.
The American Fork Temperature Laboratory is also registered to ISO 9001.
ISO 9001, ANAB Certificate No. 10100/19 »
Fluke Calibration, Everett – Fluke Park Laboratory
NVLAP Lab Code 105016-0 Certificate and Scope of Accreditation
Certificate and Scope apply to NVLAP calibration options for new and serviced electrical calibration products, all calibrations of new and serviced Metrology Wells and Metrology Calibration Baths, and all new and serviced pressure controllers and monitors.
Fluke Park Laboratory is also registered to ISO 9001.
ISO 9001, ANAB Certificate No. 10100/16
CLAS 17025 Accreditation and ANAB 9001 Registration
In Canada, the accreditation of calibration laboratories is the shared responsibility of the Standards Council of Canada (SCC) Program for the Accreditation of Laboratories-Canada (PALCAN), and the National Research Council of Canada (NRC) Calibration Laboratory Assessment Service (CLAS). The CLAS program provides quality system and technical assessment services and certification of specific measurement capabilities of calibration laboratories in support of the Canadian National Measurement System. Find more information regarding these organizations and the CLAS accreditation at SCC, PALCAN, and CLAS.
Fluke Calibration Canada
CLAS Cert No. 224 Certificate of Accreditation
CLAS Cert No. 224 Scope of Accreditation
Certificate and Scope of Accreditation apply to CLAS calibration options for new and serviced electrical calibration products.
Fluke Calibration Canada is also registered to ISO 9001.
ISO 9001, ANAB Certificate No. 10100/9
APAC
17025 Quality Manual
The Fluke 17025 Quality Manual applicable to Fluke accredited laboratories complying to ISO/IEC 17025:2005 can be found here: Fluke 17025 Quality Manual.
The Fluke 17025 Quality Manual applicable to Fluke accredited laboratories complying to ISO/IEC 17025:2017 can be found here: Fluke 17025 Quality Manual.
Fluke China Reasonable Access Policy
NVLAP 17025 Accreditation
Some calibrations offered by Fluke are performed under accreditation by the National Voluntary Laboratory Accreditation Program (NVLAP). Fluke laboratories accredited by NVLAP are identified below. Find more information regarding the NVLAP organization and accreditation at NVLAP.
Fluke Calibration, Wuhu, China – Wuhu Laboratory
NVLAP Lab Code 201046-0 Certificate of Accreditation
NVLAP Lab Code 201046-0 Scope of Accreditation
Certificate and Scope apply to NVLAP calibration options for new measurement modules.
Fluke Calibration Wuhu is also registered to ISO 9001.
ISO 9001, CQCC Certificate No. 00116Q39405R1M/3400_English »
Europe
Fluke Europe Reasonable Access Policy
UKAS 17025 Accreditation and BSI 9001 Registration
Some calibrations offered by Fluke are performed under accreditation by the United Kingdom Accreditation Service (UKAS). Fluke laboratories accredited by UKAS are identified below. Find more information regarding the UKAS organization and accreditation at UKAS ».
Norwich, UK
Norwich, Norfolk, UK - Fluke Precision Measurement Ltd
UKAS Certificate No. 0183 Certificate and Schedule of Accreditation
Fluke Precision Measurement Ltd. is also registered to ISO 9001.
ISO 9001, BSI Certificate No. FM29700
Norwich, Norfolk, UK - Comark Temperature Laboratory
UKAS Certificate No. 0451 Certificate and Schedule of Accreditation »
Norwich, Norfolk, UK - Fluke European Primary Temperature Laboratory
UKAS Certificate No. 0775 Certificate and Schedule of Accreditation
RVA 17025 Accreditation and Dekra 9001 Registration
Some calibrations offered by Fluke are performed under accreditation by the Dutch Accreditation Council (RVA). Fluke laboratories accredited by RVA are identified below. Find more information regarding the RVA organization and accreditation at RVA.
The Netherlands – Fluke Netherland B.V. Standard Laboratory
RVA Certificate No. K013 Certificate and Scope of Accreditation
Fluke Netherlands is also registered to ISO 9001.
ISO 9001, Dekra Certificate No. 89221
DAkkS 17025 Accreditation and Dekra 9001 Registration
Some calibrations offered by Fluke are performed under accreditation by the German Accreditation Body (DAkkS). Fluke laboratories accredited by DAkkS are identified below. Find more information regarding the RVA organization and accreditation at DAkkS.
Germany – Fluke Deutschland GmbH
DAkkS Certificate No. D-K-15123-01-00 Certificate and Scope of Accreditation
Fluke Deutschland GmbH is also registered to ISO 9001.
ISO 9001, Dekra Certificate No. 2193682
Germany – Fluke Process Instruments GmbH
DAkkS Certificate No. D-K-18085-01-00 Certificate and Scope of Accreditation
Fluke Process Instruments GmbH is also registered to ISO 9001.
Within the CalNet structure, Fluke is able to calibrate most of the electrical and temperature equipment of all manufacturers.
For the different types of equipment, see overview below.
Amplifiers Calibrators Capacitors Conductivity testers Counters Current probes Current Sources Currentmeters Dataloggers Decade resistors Earth leakage testers Earth testers | Electronic loads Function generators High Voltage Testers Humidity testers Inductors Isolation testers LCR meters MegOhmMeters Multimeters Oscilloscopes Ovens Pattern generators | Power supplies Recorders Resistors Shunts Tachometers Temperature calibrators Temperature probes Thermometers Vectorscopes Video generators Voltmeters Wattmeters |
Fluke is able to calibrate most of the electrical equipment herself. But also for the management of your total assets Fluke is the proper choice.
Fluke is able to subcontract all calibration and repairs, which we cannot perform ourselves, to other suppliers in an efficient way. Therefore Fluke has cooperation agreements with a number of well known suppliers, like Agilent Technologies B.V., Tektronix, Rohde & Schwarz.
Furthermore Fluke has a large database of suppliers, were on regular basis calibrations and repairs are subcontracted. All this subcontracted work is fully handled by Fluke. Calibration information of this equipment is included in our system. In this way we can clearly report on the total assets.
BEGIN EXTRA CONTENT - KEEP, REMOVE OR REHOME??
Test Equipment Asset Management (TEAM) Program
Managing multiple pieces of equipment at multiple sites is easy with a Fluke TEAM program.- Single or multiple locations
- Customized reports in either electronic or paper format
- Automatic instrument recall
- Tracking of instruments, with information that is important to you, such as asset numbers, users, departments, etc.
- Fixed, blended price for multiple locations
- Centralized management
Product Enhancement Programs
Услуги по калибровке и ремонту
Официальный сервисный центр Fluke Calibration в России
Почтовый адрес: | 125167, Москва, Ленинградский проспект, д.37 к.9, подъезд №2 |
Телефон: | +7 (495) 664-74-74 |
e-mail: | ruservicedesk@fluke.com |
Russia | Fluke Calibration
Company Name: | Fluke Russia |
Address: | 125167, Russia, Moscow Leningradskiy avenue, 37 bld. 9, entrance, 2 |
Тel: | +7 (495) 664-74-74 |
e-mail: | ruservicedesk@fluke.com |