Fluke Test leads, test probes and alligator clips
Improve your testing with Fluke's superior range of multimeter probes and leads, designed for different electronic, industrial, and automotive needs. Our reliable multimeter leads help you get the most out of your Fluke test tools. Experience enhanced versatility with our assortment, from integrated probe designs to modular retractable leads with alligator clips and various lengths of patch cords. Each test lead, extending 1.5 meters (59 inches), is crafted for precision and adaptability across multiple testing environments.
- Testing your test leads
- How TwistGuard multimeter test leads keep you safe
- How to measure signals using test probes
Fluke TLK-225 SureGrip™ Master Accessory Set
Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224...
Fluke TL224 SureGrip™ Insulated Test Leads
Straight and right angle in one extender to reach more test points.
Fluke TLK289 - Industrial Master Test Lead Set
Fluke test leads, alligator clips and test probes broaden the ability to take meter measurements in...
Fluke TP220 SureGrip™ Industrial Test Probes
SureGrip™ accessories are designed to improve steadiness in slippery hands.
Fluke TP165X Remote Control Probe
Slim probe with test button keeps your eyes on the panel while probing hard to reach points.
Fluke TLK287 Electronics Master Test Lead Set
Ideal for electronics test and design, this master set includes 11 items in a handy pouch.
Fluke TL76 2mm/4mm Test Lead Set
One pair (red, black) silicone test leads with right angle shrouded 4 mm (0.16 in) banana plugs.
Fluke AC285 SureGrip™ Alligator Clips
SureGrip™ accessories are designed to improve steadiness in slippery hands.
Fluke AC220 SureGrip™ Alligator Clips
SureGrip™ accessories are designed to improve steadiness in slippery hands.
Fluke TL40 Retractable Tip Test Lead Set
One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0...
Fluke AC280 SureGrip™ Hook Clips
SureGrip™ accessories are designed to improve steadiness in slippery hands.
TL1550B Test Leads with Alligator Clips (Red, Black, Green)
3 Test Leads connected to Low-Leakage Probes (red, black, green)3 Alligator Clips (red, black,...
Fluke AC283 SureGrip™ Pincer Clips
SureGrip™ accessories are designed to improve steadiness in slippery hands.
Fluke TLS430 – Test Leads and Alligator Clips (4 black, 1 green)
Test lead replacement set for the 430 Series Power Quality Analyzer.
Fluke TP2 Slim Reach Test Probes
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.
Fluke TP74 Lantern Tip Test Probes
When your job depends on every tool in your toolbox, Fluke test leads keep you working. Plated test...
Fluke TP38 Slim Reach Test Probe Set
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.
Fluke AC89 Heavy Duty Insulation Piercing Test Clip
Single probe pierces 0.25 to 1.5 mm insulated wire.
Fluke TL222 SureGrip™ Silicone Insulated Test Leads
SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded...
Fluke TL27 Heavy Duty Test Lead Set
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Fluke TL940 Mini-Hook Test Leads
1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks.
Fluke TLK290 Flexible Socket Probe Set
Set includes three Flexible Socket Probes and a Large Alligator Clip.
Fluke TL935 Patch Cords (60, 90, 120 cm)
3 sets (red and black pairs) of multi-stacking 4 mm banana plug patch cords
Fluke TL960 Micro-Hook Test Leads
1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks.
Fluke TL950 Mini-Pincer Test Leads
1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers.
Fluke AC87 Heavy Duty Bus Bar Clip Set
One pair (red, black) of flat, right angle design for connecting to bus bars.
Fluke TP4 Slim Reach Test Probes
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.
Fluke 1730-TL2M Test Lead Set
2 m test lead for connecting measurement input to the Fluke 1730 Energy Logger.
Fluke 17XX-TL 1.5M Test Lead Set
1.5 m test lead for connecting measurement input to Fluke 17XX Power or Energy Loggers.
Fluke 3PHVL-1730 Cable Assembly, Voltage Test Lead
Flat, three phase voltage connection cable for the Fluke 1730 Energy Logger.
Fluke AS200-G Probe Accessory Set, Grey
Probe accessory set for usage with VPS200 and PM8918 series scope probes.
Fluke AS200-R Probe Accessory Set, Red
Probe Accessory Set for usage with VPS200 & PM8918 Series Scope Probes.
Fluke BTL10 Basic Battery Analyzer Test Leads
Standard battery test probes for Fluke 500 Series Battery Analyzers.
Fluke BTL20 Interactive Battery Analyzer Test Probe
Intelligent test probe set for Fluke BT520 Battery Analyzer (temperature measurement function not...
Fluke BTL20ANG Intelligent Test Probe Set
Interactive Battery Analyzer Test Probe with angled tip for use with Fluke 500 Series Battery...
Fluke FTP SureGrip™ Fused Test Probes
In response to new ESA guidelines, Fluke introduces test probes with built-in fuses for additional...
Fluke HC120 Hook Clips (Set of 2: Red, Gray)
Set of two (one red, one gray) Hook Clips, designed for use with STL 120 Shielded Test Leads, VPS40...
Fluke ITP120 Optically Isolated External Trigger Probe
Designed for use with Fluke ScopeMeter 120-series.
Fluke RS200 Probe-Accessories Replacement Set
Contains replacement parts for usage with the VPS200 & PM8918 Scope Probes.
Fluke TP40 Automotive Back Probe Pins (five)
Flexible and formable 1-¼ inch pin provides an easy connection past weather pack seals to connector...
Fluke TP82 Insulation Piercing Clip Set
Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to...
Fluke TP88 Rigid Back Probe Pins
Better than a test probe alone – these two inch long rigid back probe pins easily pass between the...
Fluke TRM50 Coaxial Feed-through BNC Male to BNC Female Cable Terminator
TRM50 Coaxial Feed-through BNC male to BNC female Cable Terminator For ScopeMeter 190 Series...
AC288 Terminal Block Probe with Retractable Probe Tip
The Fluke AC288 Terminal Block Probe features a retractable probe tip that provides safe and secure...
Fluke TL1500DC Insulated Test Leads
Measure up to 1500 V DC for solar, wind, and battery applications.
Fluke TL80A Basic Electronic Test Lead Kit
Test leads are an integral part of the complete measurement system and extend the capabilities of...
Fluke TL81A Deluxe Electronic Test Lead Kit
Ideal for testing electronic equipment and offers versatility with modular test probes, alligator...
Fluke L215 SureGrip™ Kit with Probe Light and Probe Extenders
Foldable soft pouch with six pockets and hook-and-loop.
Fluke ES-162P3-2 3-Pole Stake Kit
Needed to perform 3-Pole Fall-of-Potential testing (Stake testing).
Fluke TLK281 SureGrip™ Automotive Test Lead Kit
Complete set of test and measurement accessories designed especially for automotive specialists.
Fluke TLK282 SureGrip™ Deluxe Automotive Test Lead Kit
Everything you can find in the TLK281 Automotive Test Lead Kit, plus a few extras.
Fluke 700MTH Premium Transmitter Test Hose Kit
Easy to use premium pressure transmitter test hose kit for connection to 1/4" female metric/BSP
Frequently asked questions for multimeter probes and test leads
What are multimeter probes?
Multimeter probes are precision tools used with multimeters to measure electrical parameters. They connect to the multimeter and physically contact the component or circuit to facilitate accurate readings.
What are the types of multimeter probes?
Multimeter probes include standard probes, alligator clips, and specialty probes designed for specific applications, such as high-energy environments or tight spaces.
How do you use multimeter probes?
To use multimeter probes, connect them to the multimeter, select the appropriate measurement type on the multimeter, and then touch the probe tips to the test points of the circuit or component.
What are the types of test probes?
Test probes vary in design and function, including standard needle-type probes, hook clips for grabbing wires, and piercing probes for penetrating insulation to measure circuit parameters.
What is the difference between test leads and test probes?
Test leads are the wires that connect the multimeter to the probes. Test probes are the contact points that interface with the circuit or device under test.
What is a test lead?
A test lead is a conductor, typically with a connector at one end and a probe or alligator clip at the other, used to connect a multimeter to the point of measurement.
What are test leads used for?
Test leads are used to safely and effectively connect a multimeter to a circuit, component, or device for measuring electrical parameters like voltage, current, and resistance.